X2 Requirements

General discussions about the games by Egosoft including X-BTF, XT, X², X³: Reunion, X³: Terran Conflict and X³: Albion Prelude.

Moderator: Moderators for English X Forum

James*
Posts: 67
Joined: Wed, 6. Nov 02, 20:31

X2 Requirements

Post by James* » Sun, 24. Nov 02, 14:01

Can someone tell me again wot the requirements are to run X2?

User avatar
Dutchman
Posts: 803
Joined: Wed, 6. Nov 02, 20:31
x2

Post by Dutchman » Sun, 24. Nov 02, 14:33

What do you mean by "again" ?
I don't think it's published yet what the minimum or recomended requirements are.
Maybe I missed something, then I would realy like to know too.
specialy the minimum requirements, since my computer might be to slow but I don't have the funds to buy me a new one.

Not that I'm not going to buy X2 anyway :)

Dutchman

James*
Posts: 67
Joined: Wed, 6. Nov 02, 20:31

Post by James* » Sun, 24. Nov 02, 14:37

I know it isnt released yet and I put again because I knew but forgot.

Meltdown
Posts: 337
Joined: Wed, 6. Nov 02, 20:31

Post by Meltdown » Sun, 24. Nov 02, 15:20

/me wants a GeForce 4 [ external image ]

The_Abyss
Posts: 14933
Joined: Tue, 12. Nov 02, 00:26
x3

Post by The_Abyss » Sun, 24. Nov 02, 17:35

I think that the recommended were 700mhz, with 256 ram (512 for Win XP) and if you want the full graphics effects (rippling textured hulls etc) then a Direct X 8 optimised card (i.e GF 4). The minimum specs will undoubtedly be below this though. I think it mentioned something on the 2nd from last X2 update interview with Bernd.
Strung out on Britain's high, hitting an all time low

User avatar
cappedup
Posts: 3957
Joined: Wed, 6. Nov 02, 20:31
x4

Post by cappedup » Sun, 24. Nov 02, 17:40

Dutchman wrote:Not that I'm not going to buy X2 anyway :)

Dutchman
Go on tell us why, master..!!
_________________

Success is going from failure to failure without losing enthusiasm - Winston Churchill


chrishillproduction.com

The_Abyss
Posts: 14933
Joined: Tue, 12. Nov 02, 00:26
x3

Post by The_Abyss » Sun, 24. Nov 02, 17:59

I think that's the double negative - it means whatever happens and whatever the requirements, he will purchase X2.
Strung out on Britain's high, hitting an all time low

pjknibbs
Posts: 41359
Joined: Wed, 6. Nov 02, 20:31
x4

Post by pjknibbs » Mon, 25. Nov 02, 07:35

The_Abyss wrote:I think that the recommended were 700mhz, with 256 ram (512 for Win XP) and if you want the full graphics effects (rippling textured hulls etc) then a Direct X 8 optimised card (i.e GF 4).
Or GF3, which are much cheaper if you happen to be financially challenged. :-)

User avatar
Dutchman
Posts: 803
Joined: Wed, 6. Nov 02, 20:31
x2

Post by Dutchman » Mon, 25. Nov 02, 13:06

cappedup wrote:
Dutchman wrote:Not that I'm not going to buy X2 anyway :)

Dutchman
Go on tell us why, master..!!
Sorry for the clumsy english cappedup, The_Abyss was right.
I meant that I am going to buy X2 no matter what, X2 rocks.
I've been looking into Freelancer too and it seems ok to me so far, but the atmosphere or caracter of Freelancer doesn't apeal to me as X2 does.
As far as I can see, Freelancer is still to limited regarding freedom of play, and what I read about it, you can fly only +/- 26 ships, that's not even half of the ships availabe in X2 :)
To me Freelancer makes the same impression as Tachyon the Fringe did, ok but not quite perfect. And who knows maybe I will be able to play X2 on my system although with lesser graphic options untill I do have the money to get me a faster system.

X2 Rocks !!!!!!!!!!!!!!!!

Dutchman

Moss
Posts: 510
Joined: Wed, 6. Nov 02, 20:31
x2

Post by Moss » Mon, 25. Nov 02, 13:21

I'm fairly certain that I read somewhere, possibly the old forum, that if your machine could run X-Tension it would also run X2 The Threat (this may have changed) obviously tho it would not run with all the best features on, unless of course you had a great system to run X-T on already!

Its certain that Egosoft will want the maximum amount of people to be able to run the new game and will allow for lower spec machines to do so, and in my opinion graphics aren't the only thing to make a game great!

Having said that tho I have been upgrading my PC recently :)

hex40k
Posts: 191
Joined: Wed, 6. Nov 02, 20:31
x3tc

Post by hex40k » Mon, 25. Nov 02, 13:45

I think that the recommended were 700mhz, with 256 ram (512 for Win XP) and if you want the full graphics effects (rippling textured hulls etc) then a Direct X 8 optimised card (i.e GF 4).
but will all the sfx run on a Kyro I gfx chipset?
This space is reserved for a witty comment or quote.

pjknibbs
Posts: 41359
Joined: Wed, 6. Nov 02, 20:31
x4

Post by pjknibbs » Mon, 25. Nov 02, 14:47

hex40k wrote:but will all the sfx run on a Kyro I gfx chipset?
No, and not on a Kyro 2 either--neither of these chipsets are DirectX 8 parts. If they ever release a Kyro 3 you might be in luck!

hex40k
Posts: 191
Joined: Wed, 6. Nov 02, 20:31
x3tc

Post by hex40k » Mon, 25. Nov 02, 23:20

Woo hoo! 64MB g force 4 for christmas then.
This space is reserved for a witty comment or quote.

James*
Posts: 67
Joined: Wed, 6. Nov 02, 20:31

Post by James* » Sat, 30. Nov 02, 14:48

I was asking because was getting a New PC which I now have and it should run X2 without any problems,

Compaq Presario 6000 Series
256MB DDR
60GB UltraDMA Hard Drive
16x DVD-rom drive
DVD rewriter
NVIDIA GeForce 4 MX 420 64MB dedicated video memory

The_Abyss
Posts: 14933
Joined: Tue, 12. Nov 02, 00:26
x3

Post by The_Abyss » Sat, 30. Nov 02, 16:07

What size is the processor and what type? Think more memory would be a good idea - some people needed more than 256mb to run full SETA in XT. GFX card is ok but would try to upgrade to a GF4 Ti if you can stretch.
Strung out on Britain's high, hitting an all time low

User avatar
Inimbrium
Posts: 84
Joined: Wed, 6. Nov 02, 20:31
x3tc

Post by Inimbrium » Sat, 30. Nov 02, 16:45

He's right mate. I also think that you shouild upgrade the MX 420. They kinda are notoriously slow. Sorry. The 440 is ok, the 460 is a bit better, but if you want to run games smoothly, you will <b> need </b> a better card. Perhaps a GF4 Ti, or the new Radeons (9000/9500/9700PRO).

I seriously doubt that X² will recomend 512 MB RAM, not if it's based on a similar if not the same engine as X-TENSION.
I have a slow CPU 1GHz, but i got the Hercules Radeon 9700 Pro and I'm sure that the game will run smoothly even at the highest settings, so if i were you guys, i'd concentrate on the graphics, not the CPU. However, if you can get both, then go ahead! :)
My opinion.

pjknibbs
Posts: 41359
Joined: Wed, 6. Nov 02, 20:31
x4

Post by pjknibbs » Sun, 1. Dec 02, 08:00

Inimbrium wrote:I seriously doubt that X² will recomend 512 MB RAM, not if it's based on a similar if not the same engine as X-TENSION.
I have a slow CPU 1GHz, but i got the Hercules Radeon 9700 Pro and I'm sure that the game will run smoothly even at the highest settings, so if i were you guys, i'd concentrate on the graphics, not the CPU. However, if you can get both, then go ahead! :)
My opinion.
Of course, I'd argue you're not going to be able to utilise the full horsepower of that card with a CPU that slow (says the man with a whole 1.2GHz :-))--you probably could have got a standard 9700, or even a 9500 Pro, without seriously affecting your frame rates.

Of course, once you get round to upgrading the CPU your system will SCREAM... (speedwise that is!).

Woffin
Posts: 272
Joined: Wed, 6. Nov 02, 20:31
x3tc

Post by Woffin » Sun, 1. Dec 02, 11:12

My PC is 256MB Ram, 550Mhz, 35GB free space on C:\ but no graphics or sound cards..just the inbuilt that comes with a pentium three....would X2 be able to run on my PC??? :?

Danfin

User avatar
Apothos
Posts: 3949
Joined: Wed, 6. Nov 02, 20:31
x3tc

Post by Apothos » Sun, 1. Dec 02, 11:22

Danfin wrote:My PC is 256MB Ram, 550Mhz, 35GB free space on C:\ but no graphics or sound cards..just the inbuilt that comes with a pentium three....would X2 be able to run on my PC?
Lowest spec. i've had the beta running on was a 700mhz Duron with 128mb SDRAM, and i think it was using an old ATI Rage Fury but i'd have to check - it wasnt up to much tho. I have a 550mhz K6-3 some where i could give it a try with, i s'pose.

hex40k
Posts: 191
Joined: Wed, 6. Nov 02, 20:31
x3tc

Post by hex40k » Sun, 1. Dec 02, 11:27

I'll be running it on an AMD Athalon XP 1.6Ghz wit 256MBram and a geeforce 4 64/128 depending on how much it costs.
This space is reserved for a witty comment or quote.

Post Reply

Return to “X Trilogy Universe”